DNS host
Spaceship DNS settings for SPF, DKIM and DMARC
In Spaceship open Advanced DNS from Launchpad, click the arrow next to the domain and select Add record. SPF is a TXT record with Host @, DMARC a TXT record with Host _dmarc, and DKIM a TXT or CNAME record at <selector>._domainkey. The records work while the domain uses Spaceship nameservers, launch1 and launch2.spaceship.net. Spacemail's DKIM key sits at spacemail._domainkey.
Spaceship
What goes in Host
- SPF · Host
@- DKIM · Host
<selector>._domainkey- DMARC · Host
_dmarc
Check the records after you save them
Enter the domain: SPF, DKIM at common selectors, DMARC and MX are looked up live, so you see whether Spaceship is serving the new records yet.
Try
Lookups go from your browser to Cloudflare's public DNS resolver; nothing is stored. Without a selector the checker tries the ones providers document.
What you get
The result, in plain words
- Pass, warning or fail for SPF, DKIM, DMARC and MX
- SPF lookups counted against the limit of 10
- DKIM keys found at google, selector1, selector2 and 50+ other selectors
- The records to publish, with the steps at your DNS host
Spacemail
SPF, DKIM and DMARC for Spacemail
Spaceship's own email sets its DKIM key itself when the domain uses Spaceship nameservers. DMARC is yours to add, and a third-party DNS host needs every record by hand. If you only host DNS here, skip to the field values.
Spacemail
Spaceship's mailboxes; the values below are what a third-party DNS host needs
- SPF at @
v=spf1 include:spf.spacemail.com ~all- MX at @
mx1.spacemail.com and mx2.spacemail.com, priority 0
- DKIM · Host
spacemail._domainkey- DKIM value
The TXT record that starts with v=DKIM1; k=rsa; under Inactive records in Advanced DNS
- DMARC at _dmarc
v=DMARC1; p=none; rua=mailto:<your address>
- Spacemail does not provide a DMARC record; Spaceship's guide builds one in MxToolbox's generator and marks p=reject as recommendedsource (opens the vendor's page in a new tab)
- For a domain registered elsewhere, the verification TXT record is in Advanced DNS under Manage > View guides > Verifying domain ownershipsource (opens the vendor's page in a new tab)
- An SRV record at _autodiscover._tcp pointing to autoconfig.spacemail.com on port 443 lets mail apps find the server settingssource (opens the vendor's page in a new tab)
Step by step
Unbox the subscriptionsource (opens the vendor's page in a new tab)
In Spacemail Manager click Unbox, then Start and Add Domain, pick the domain, then Continue and Connect
On Spaceship nameserverssource (opens the vendor's page in a new tab)
The DKIM record is set up automatically once Spacemail is unboxed; add DMARC yourself as a TXT record with Host _dmarc in Advanced DNS
On third-party nameserverssource (opens the vendor's page in a new tab)
Add the MX, SPF, DKIM and DMARC records above at the DNS provider that runs the nameservers; a domain registered outside Spaceship needs the TXT verification record first
Copy the DKIM keysource (opens the vendor's page in a new tab)
Advanced DNS > the arrow next to the domain > Inactive records > Spacemail DNS records: copy the v=DKIM1; k=rsa; TXT and add it at spacemail._domainkey. It can take a few hours to start working
Field values
What goes in each field in Spaceship
Where: Launchpad > Advanced DNS > the arrow next to the domain > DNS records > Custom recordssource (opens the vendor's page in a new tab)
- Type
- TXT
- Host
@- Value
- v=spf1 include:<your provider> ~all
- TTL
- 20 min, as in Spaceship's DMARC example
- Type
- TXT, or CNAME if your provider gives a CNAME
- Host
<selector>._domainkey- Value
- The key or the CNAME target from your provider
- TTL
- 20 min, as in Spaceship's DMARC example
- Type
- TXT
- Host
_dmarc- Value
- v=DMARC1; p=none; rua=mailto:<address>
- TTL
- 20 min (Spaceship's example)
Step by step
Add a record in Spaceship
TXT record: SPF, DMARC and DKIM keys
Open Advanced DNSsource (opens the vendor's page in a new tab)
Sign in, open Advanced DNS from Launchpad and click the arrow next to the domain
Add a TXT recordsource (opens the vendor's page in a new tab)
Click Add record and select TXT from the list
Host, Value and TTLsource (opens the vendor's page in a new tab)
Host is @ for SPF, _dmarc for DMARC or <selector>._domainkey for a DKIM key. Paste the record into Value and pick the TTL
Addsource (opens the vendor's page in a new tab)
Click Add to save the record. Spaceship's DMARC guide says to allow up to 30 minutes for the change
CNAME record: DKIM from a provider that hosts the key
Open Custom recordssource (opens the vendor's page in a new tab)
Advanced DNS > the domain > DNS records > Custom records
Choose CNAMEsource (opens the vendor's page in a new tab)
Pick CNAME from the suggested list; +Add record adds more records from the drop-down
Host and Valuesource (opens the vendor's page in a new tab)
Type the Host your provider gives, such as selector1._domainkey, and the target in the Value field, then select Add
Watch propagationsource (opens the vendor's page in a new tab)
The propagation icon in Advanced DNS changes status as the record spreads, and the Propagation Checker tracks servers on a map
Spaceship specifics
Before you save
- Host is relative to your domain: @ stands for yourdomain.com and spacemail._domainkey for spacemail._domainkey.yourdomain.comsource (opens the vendor's page in a new tab)
- Several SPF records on one Host conflict; combine every sending service's include into a single SPF recordsource (opens the vendor's page in a new tab)
- Records here work while the domain uses Spaceship nameservers, launch1.spaceship.net and launch2.spaceship.net; on custom nameservers, add them at that DNS providersource (opens the vendor's page in a new tab)
- Switching to custom nameservers ends hosting and email connections; the old records stay as Inactive records, which apply again only after a switch backsource (opens the vendor's page in a new tab)
- Record changes usually spread within minutes to a few hours; a nameserver change takes up to 48 hourssource (opens the vendor's page in a new tab)
- DNS Presets Manager saves a set of DNS settings, and Domain Portfolio applies presets and updates nameservers in bulksource (opens the vendor's page in a new tab)
Records by provider
The exact values each service asks for:
Troubleshooting
Common Spaceship errors and fixes
Records saved in Spaceship but not live
The domain uses custom nameservers, so its records here are inactive; add them at that DNS provider or switch back to Spaceship nameserverssource (opens the vendor's page in a new tab)
Are you sure? Some products might stop working properly
Spaceship asks this on a switch to custom nameservers, which ends hosting and email connections: recreate those records at the new DNS provider before you click Yes, change to Custom DNSsource (opens the vendor's page in a new tab)
Server not found or DNS_PROBE_FINISHED_NXDOMAIN
This can mean the nameservers hold no zone for the domain: check they match your DNS host's exactly, ask the host to create the zone, or wait up to 48 hours after a changesource (opens the vendor's page in a new tab)
Two SPF records conflict
Merge every include into one SPF record at @source (opens the vendor's page in a new tab)
Spacemail DKIM missing on a third-party DNS host
Copy the v=DKIM1; k=rsa; record from Inactive records in Advanced DNS and add it as TXT at spacemail._domainkeysource (opens the vendor's page in a new tab)
Spacemail login or sending fails on a domain registered elsewhere
Add the TXT verification record: until the domain is verified the subscription is not connected to it and may be disconnected latersource (opens the vendor's page in a new tab)
Bounce JFE030050 on mail to a Spacemail address
Check the mailbox exists and is not full and the domain is registered and active; if the domain was just updated, wait up to 72 hours for DNS propagationsource (opens the vendor's page in a new tab)
For cold email
Mailboxes that come with the DNS records done
Outreach2day buys the domains, publishes SPF, DKIM and DMARC, creates the mailboxes and starts warmup, then sends your campaigns from its own sequencer or exports the mailboxes to Instantly or Smartlead.
- SPF, DKIM and DMARC set for youOn every domain, checked after setup and kept in place
- $2.50 a mailbox a month12-mailbox minimum; warmup and the sending engine included
- 1,000+ mailboxesA volume price per mailbox, quoted on a call
Questions
What are the Spaceship DNS settings for email?
The Spaceship DNS configuration for email is three records in Advanced DNS: a TXT record at @ with your provider's SPF value, the DKIM TXT or CNAME record your provider gives at <selector>._domainkey, and a TXT record at _dmarc, such as v=DMARC1; p=none; rua=mailto:dmarc@yourdomain.com.
For Spacemail the values are v=spf1 include:spf.spacemail.com ~all, MX records mx1 and mx2.spacemail.com, and the DKIM key at spacemail._domainkey. On Spaceship nameservers Spacemail sets the DKIM record itself.
How do I add a Spaceship SPF record?
Open Advanced DNS, click the arrow next to the domain, then Add record and TXT. Enter @ as the Host and your provider's value, such as v=spf1 include:<your provider> ~all, then click Add. Keep one SPF record per domain and put every sending service's include in it.
What are the Spaceship DNS servers?
Spaceship's nameservers are launch1.spaceship.net and launch2.spaceship.net, and records in Advanced DNS work only while the domain uses them. To move DNS elsewhere, open the Nameservers section in Advanced DNS, click Change and choose Custom nameservers; the switch can take up to 48 hours.
How do I set up SPF, DKIM and DMARC on many Spaceship domains for cold email?
Each sending domain needs its own SPF record at @, the DKIM record from the service that sends its mail and a TXT record at _dmarc. Spaceship's DNS Presets Manager saves a set of DNS settings, and Domain Portfolio applies presets and updates nameservers in bulk.
Outreach2day cold email infrastructure sets SPF, DKIM and DMARC automatically, including on domains you connect by pointing their nameservers to us.
Sources
Spaceship documentation, checked . Menus and values change; if a step differs, Spaceship's own page is the reference.
- What are DNS Records and what do they do? (spaceship.com)
- What is an Alias record and how do they work? (spaceship.com)
- Understanding DNS propagation (spaceship.com)
- How to connect a Spaceship domain name to third-party nameservers (spaceship.com)
- How to set up a DKIM record for Spacemail? (spaceship.com)
- How to set up a DMARC record for your domain with Spacemail (spaceship.com)
- What DNS records do I need to set up for a third-party domain? (spaceship.com)
- How to set up Spacemail DNS records on Namecheap Basic/Premium nameservers (spaceship.com)
- How do I set up my email? (spaceship.com)
- Jellyfish Error Codes (spaceship.com)
Deliverability call
Talk to our deliverability team
Book a call with the people who run our mailbox infrastructure. We look at your current setup and tell you what to change. Running 1,000+ mailboxes? We also quote a volume price below every vendor list price in our comparisons, warmup and sending included.
- Review your domains, DNS records and current inbox placement
- Size the setup: domains, mailboxes per domain and daily volume per mailbox
- Plan warmup and the move from your current provider or sequencer
- 1,000+ mailboxes: a volume price per mailbox for your setup
Free call
See open times in your time zone and book on this page.
Or open the booking pageLoading available times…
Open the booking page instead